Mitsubishi VS-55601 Owner's Manual page 25

TV + cable with a cable box
'_If TV GUIDE Plus+ will be used
Use this hook-up if:
• you will be using TV GUIDE Plus+
• you use a cable box only to descramble premium cable channels
;n Emitter ConneClion
To complete the hook-up, you'll need:
• three lengths of 75 ohm. coaxial cable
• one IR emitter (provided _ith TV)
• one two way splitter (as shown in diagram
below.)
O Connect the cable system's incoming cable to the IN terminal on
the two-way splitter.
O Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of this cable to the ANT-B termi-
nal on the back of the TV.
O
O
O
Connect a second coaxial cable to the other OUT terminal on the
splitter; connect the other end of this cable to the IN terminal on
the cable box.
Connect the third coaxial cable to the OUT terminal on the back
of the cable box; connect the other end of this cable to the. ANT-A
terminal on the back of the TV.
Connect the IR emitter. Follow the procedures in the TV GUIDE
Plus+ Operating Guide.
Incoming
Cable
@
c_r
_J I '=' _' I L'- "_'°'°"°
Jo
Q O
Cable Box
Rear Terminal
C
24 Chapter 2: Connecting Your TV