Mitsubishi VS-55601 Owner's Manual page 58

+
m
Adding and deleting channels
Either "In memory" or
"Not in memory" will appear.
TV GUIDE Plus+ offers a singular method to add/delete channels. ]
See the TV GUIDE Plus+ Operating Guide. However, you can still
J
follow the instructions below for ANT-B channels.
After all available channels have been :memorized with the
"Memorize Channels" feature, channels with weaker signals can be
added or deleted with the following procedure.
r_TV Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[]Select A/V Memory
[]Guide Plus+ Menu
_ DJUST to select
ENTER to enter
r_3 MENU to exit menus
[] First Time Setup
[] Set the Clock
[] Memorize Channels
[] Add/delete Channels
[] Set AN Network
[] Convergence
] ADJUST to select
ENTER to enter
MENU to go back
O Press the MENU button on the
remote control. The Main
Menu will .appear on the
screen.
O Use the ADJUST buttons to
select "First Time Setup".
Press ENTEIUEXCH.
Use the ADJUST buttons to
select "Add/delete Channels".
Press ENTEIUEXCH.
0 The "Add/delete Channels"
screen will appear. Use the
ADJUST buttons to select the
channel you would like to add
or delete.
(You can also use the
CHANNEL controls to select
channels a:[ready in memory.)
[] Add/delete Channels
Antenna A
Indoor/outdoor)
]Channel :003 ABCD
Not in memory
1
_--1 ADJUST to select
ENTER to add
MENU to go back
O If a channel is labeled "In
memory", use the CANCEL
button to remove it from
memory. IF a channel is labeled
"Not in memory", use the
ENTER/EXCH button to add it
to memory
When you are finished adding
and deleting channels, press
the HOME button to return to
normal TV viewing.
Adding a channel to memory allows you to tune to the channel
with the CHANNEL up/down controls. If a channel is not in
memory, you can only tune to it with the number buttons.
58 Chapter 3: Operating Your TV