Mitsubishi VS-55601 Owner's Manual page 65

Naming the channels (cont.)
[] Name the Channels
_] ntenna : A I
(Indoodoutdoor)
Channel : - - -
r_New name : ....
.--_ ADJUST to select
ENTER to enter
MENU to go back
[] Name the Channels
_[_] Antenna : A [
(Indoor/outdoor)
Channel :003
[_] New name : ....
_-----'1ADJUST to select
ENTER to enter
MENU to go back
O Use the ADJUST buttons and
the ENTER/EXCH button to
select each letter in the new
name. You can use letters
(A - Z), numbers (0 - 9), or
symbols (:/., ( ) ? "# $ % &'
blank + ; < = > ? blank - ) for
the new name.
If you press the C_.aNCEL
button while setting the name,
you will move one position back.
You can c,lear the entire name
by pressing CANCEL when the
first position is underlined.
O When you are finished, press
the HOME buttcn to return to
normal viewing.
DImportant: The name you set will appear instead of the call letters being
supplied by Extended Data Services (XDS).
_>Important:
Message "Memory over!" will indicate that the memory is full. If
the memory is full and you want to name a channel, you must use
the above steps to clear the name for an existing channel. You can
then select the new channel to name.
Getting Started 65