Mitsubishi VS-55601 Owner's Manual page 37

TV + stereo audio system
You may want to hear the sound from your TV and!or VCR through
your home audio system. To do this, complete the necessary
connections shown on previous pages of this chapter, then follow
the procedure on this page.
equipment you will need
To hook up an audio system, you will need
one set of RCA pin type audio cables.
procedure
O Connect the audio cables to the AUDIO OUTPUT terminals
on the back of the TV. Use the red cable 1:oconnect the right
(R) channel and the white cable to connect the left (L)
channel.
O Connect the other ends of these cables to the TV IN or AUX
IN terminals on the back of the audio system.
Turn off the TV's speakers. To do this, press AUDIO on the
remote control until you see the SPEAKER display. Set the
speakers to "Off' by pressing either ADJUST right (_) or
ADJUST left (,). See "Adjusting the Sound" in Chapter 3.
0 Set the audio system's input to the TV or AUX position.
_Important: For proper tone and volume balance, turn off the TV speakers when
using an external audio system.
Audio system rear terminals
mclo
co AL TAPE I TA_
\
TV Rear Terminals
CABLE
ANT-A LOOP_UT ANT -B
@@@
ACTIVE AN IPJG
NETWORK LiNK
® ®
S-VIOEQ VIDEO
36 Chapter 2: Connecting Your TV