Remote Control Keys And Functions - Mitsubishi VS-50800 Owner's Manual

% select switch
Your remote control has four layers:
1) TV, 2) VCR, 3) DVD/CABLE and 4)
AUDIO. You can set up each of these
layers to operate a different piece of
equipment. Use this switch to select the
layer you want to set up or use.
˙ power key (POWER)
Press this switch to turn the TV on or off.
˘ number key (0-9)
Use to select a channel number, to select
an SQV bank, to enter a parental lock
code, OR
to enter zip codes for TV GUIDE Plus+
setup.
¯ channel selector (CHANNEL)
Press the top part of the key to change to
a channel with a higher number; press
the bottom part to change to a channel
with a lower number.
In the DTV menu, pressing and holding
this key will scroll through the major
channels.
™
¬ SuperQuickView
Press to view channels you have
programmed into SuperQuickView
memory. A long key press will add
channels to SQV memory.
Ævolume control (VOLUME)
Press the top part of the key to increase
the volume. Press the bottom part of the
key to decrease the volume.
+ input key (INPUT)
Use to select the input source:
• TV channels on Antenna A or B.
• Other equipment connected to:
- Input 1 - Input 2
- Input 3 or DVD - Input 4
20
Remote control keys and functions (cont.)
key (SQV)
™
Chapter 1: Getting to Know Your TV
• TV channels on HDTV receiver.
Œrecall key (RCL)
Press this button to switch to the last
channel viewed. Press again to return
to the original channel.
œ cancel/sub key (CANCEL/SUB)
Use to clear the current entry without
exiting the menu. When a SQV channel
is displayed, pressing this key will
delete the channel from the SQV
choices.
This key has a special function for
HDTV. In HDTV mode, entering two
digits and pressing the CANCEL/SUB
key will allow you to enter a subchannel
(SUB) number.
¥ mute control (MUTE)
Use to turn the sound off completely or
to restore it to its original volume.
... enter/exchange key (ENTER/EXCH)
Use this key after selecting a channel
number, after selecting an item from the
onscreen menu system, or with the
picture-in-picture mode.
ª information key (INFO)
Use to view an onscreen summary of the
current settings for the TV.
This button is also used extensively for
added program information in the
GUIDE Plus+ menu system. See the TV
GUIDE Plus + Operating Guide.
ºlight key
Use to light up the remote (for four
seconds).
.