Mitsubishi VS-55601 Owner's Manual page 14

Overview of the Control Panel (cont.)
_) intelligent room illumination sensor
(IRIS)
TM
This sensor :regulates the automatic con-
trast and brightness adjustment for the
]IRIS feature. See "Customizing the A/V
memory settings" in Chapter 3.
(_ :power, or program timer indicator
(POWER) (PROGRAM TIMER)
this indicator lights up in green when you
turn the TV on. It blinks in green when the
TV is off and the timer has been set.
(_ power button (POWER)
Use to turn the TV on or off.
(_) volume controls
(VOLUME or VOL • V)
Press the (•) button to increase the vol-
ume. It is also used to make right adjust-
ments in some menus. The (V) button
decreases the volume and is used for left
adjustments in some menus.
channel controls
(CHANNEL or CH • V)
Use the (•) button to switch to a channel
with a higher number and the (V) button to
switch to a channel with a lower number.
This button will also adjust the alignment
in the "Convergence" menu and can be used
to move up (•) or down (V) in the menu
mode.
_) cancel]reset button
(CANCEL/RESET or A/V RESET)
Can be used as CANCEL when using an on-
screen menu and as AiV RESET in normal
TV viewing.
(CANCEL,) This button is used to clear the
settings of some on-screen menus. It can
also be used for Guide Plus+ installation as
explained in TV Guide Plus+ Operating
Guide.
(RESET or A/V RESET) Prc_ss to reset all
audio and video functions to their original
factory adjustments or setting except for
volume, the "Listen to" function (Stereo/
SAP/Mono), speaker (off/on), mo:_itor out
(variable/fixed), background (black/gray),
IRIS, Instant Info, and closed captioning.
(_) menu button (MENU)
Use this button to display the on-screen
menu system, which contains additional
instructions for special functions.
(_) enter button (ENTER)
Use this button after selecting an item from
the on-screen menu system.
(_ input button (INPUT)
Use to select the input source you wish to
view:
• TV channels on Antenna A (/_mt-A) or
Antenna B (Ant-B) and/or
• other equipment connected to Input 1, 2,
or 3
(_) S-video input terminal
Use to connect the S-video output of a
camcorder or other componer_t l_othe TV.
If you connect an S-video cabLe to this
terminal, the adjacent video input terminal
cannot be used.
(_) video input terminal
Use to connect the video output from a
standard camcorder or other component to
the TV.
(_) audio input terminals
Use to connect the audio output from a
camcorder or other component.
Overview of the Control Panel 13