Mitsubishi VS-55601 Owner's Manual page 77

AV
Customizing the A/V memory settings (cont.)
Adjusting the audio functions
You can adjust the audio settings for any A/V memory position
using the MENU or AUDIO buttons on the remote ccntrol.
access with the MENU button
O Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
_-"] "1*VMain Menu
_ First Time Setup
Customize Display
[]Guide Plus+ Menu
_ ADJUST to select
ENTER to enter
MENU to exit menus
[] Select/VV Memory
[] Standard
[] Music
[] Movie
_-]ADJUST to select
_] ENTER to enter
[_ CANCEL Io reset
[_ MENU to go back
[] Audio Function
Standard
[] Listen to : Stereo
[] Bass
[] Treble
[] Balance
[] Surround : Simulate
[] Speaker: Off
[] Monilor out : Variable
[] Level Sound
O Use the ADJUST buttons to
choose "Select A/V Memory".
Press ENTER/EXCH. The five
A/V memory positions will
appear. Select the A/V position
by pressing the ADJUST up/
down buttons. Press ENTER/
EXCH twice to display the
settings for the selected audio
mode.
The audio settings for the
selected A/V memory position
are displayed. Use the AD-
JUST up/down buttons to select
the, setting to change. Do N__O__:
press ENTEP_',XCH.
0 Press either _he left or right
ADJUST buttor.
The setting appears at the
bottom of the screen.
While the setting is still on the
screen, use the ADJUST right/
left. buttons to adjust it.
The functions disappear from
the screen after a few seconds.
You cannot adjust a function if
it i,_ not on the screen.
Getting Started 77