Color; Collated - Dell C1765nf Color Laser User Manual

Color

To select mode for color or black and white copying.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the (Copy) button.
3 Press the (Color Mode) button to select the desired color mode.
4 Press the (Start) button to begin copying.
NOTE:
If the Function Enabled setting for
password to use the copy function. If the Function Enabled setting for
details, see "Function Enabled" on page 197.

Collated

To sort the copy output: For example, if you make two copies of three page documents, one complete three page
document will print followed by the second complete document.
NOTE:
Copying documents with a large amount of data may exhaust available memory.
If a memory shortage occurs, cancel the collating by turning
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the (Copy) button.
3 Ensure that Collated is highlighted, and then press the
4 Press the button to select the desired setting, and then press the
NOTE:
Values marked by an asterisk (
Uncollated*
Collated
Auto
5 If necessary, customize the copy settings including the number of copies, contrast, and image quality. See "Setting
Copy Options" on page 235.
6 Press the (Start) button to begin copying.
236
Copying
is set to
Copy
*
) are the factory default menu settings.
Does not sort the copy job
Sorts the copy job
Automatically determines which output mode for the copy job
, you need to enter the four digit
On(Color Password)
is set to
Copy Off
to
Collated Uncollated
(Set) button.
(Set) button.
, the copy function is disabled. For
on the operator panel.