Dell C1765nf Color Laser User Manual page 180

Ad-hoc
NOTE:
This item is displayed when the Ethernet cable is disconnected and
WPS (Dell C1765nfw Color Multifunction Printer only)
Purpose:
To configure the wireless network using WPS.
Values:
Push Button Control PBC Start
PIN Code Start Configuration
Print PIN Code
*1
You can also start WPS-PBC by pressing and holding the
NOTE:
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK
AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)
NOTE:
This item is displayed when the Ethernet cable is disconnected and
178
Understanding the Printer Menus
WPA2-PSK-AES Select to configure the wireless setting with the security method of
WPA2-PSK-AES or WPA-PSK-AES.
PassPhrase
Entry
WEP Specifies the WEP key to use through the wireless network. For 64bit
keys, up to 10 hexadecimal characters can be entered. For 128bit keys,
up to 26 hexadecimal characters can be entered.
Transmit Key
Select to configure the wireless setting without the access point such as
a wireless router.
*
No Security Specify No Security to configure the wireless setting without specifying
the security method from WEP .
WEP Specifies the WEP key to use through the wireless network. For 64bit
keys, up to 10 hexadecimal characters can be entered. For 128bit keys,
up to 26 hexadecimal characters can be entered.
Transmit Key
*1 *
No Disables the security method of WPS-PBC.
Yes Configures the wireless setting with the security method of
WPS-PBC.
Configures the wireless setting using the PIN code assigned
automatically by the printer.
Prints the PIN code. Confirm it when you enter the PIN code to
your computer.
(Wi-Fi | WPS) button.
Specify the passphrase of alphanumeric characters
from 8 to 63.
Specifies the transmit key from WEP Key 1
Key 2, WEP Key 3, and WEP Key 4.
Specifies the transmit key from WEP Key 1
Key 2, WEP Key 3, and WEP Key 4.
is set to .
Wi-Fi On
is set to .
Wi-Fi On
*
, WEP
*
, WEP