Dell C1765nf Color Laser User Manual page 162

Junk Fax Setup Off
On
Remote Receive Off
On
Remote Rcv Tone Available Range:
00–99
Fax Header On
Off
Fax Header Name
Fax Number
Fax Cover Page Off
On
DRPD Pattern Pattern1–7
Sent Fax Fwd Off
Forward
Print and Forward
Fax Fwd Number
Prefix Dial Off
On
Prefix Dial Num
Discard Size Off
On
Auto Reduction
ECM On
Off
Modem Speed 2.4
4.8
9.6
14.4
33.6
Fax Activity Auto Print
No Auto Print
Fax Transmit Print Disable
Print On Error
Print Always
160
Understanding the Tool Box Menus
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers by accepting faxes only from the fax
numbers registered in the Phone Book.
Disables the remote receive feature.
Receives a fax by pressing a remote receive code on the external telephone after
picking up the handset of the telephone.
Specifies the remote receive code in two digits to start Remote Receive.
Prints the information of sender on the header of faxes.
Does not print the information of sender on the header of faxes.
Sets the name of sender to be printed on the header of faxes. Up to 30
alphanumeric characters can be entered.
Sets the fax number of the printer to be printed on the header of faxes.
Does not attach a cover page to faxes.
Attaches a cover page to faxes.
Provides a separate number for faxing with a distinctive ring pattern.
Does not forward incoming faxes.
Always forwards incoming faxes to a specified destination.
Always forwards incoming faxes to a specified destination and prints all forwarded
incoming faxes.
Specifies the fax number of the destination to which incoming faxes will be
forwarded.
Does not set a prefix dial number.
Sets a prefix dial number.
Sets a prefix dial number of up to five digits. This number dials before any auto
dial number is started. It is useful for accessing the Private Automatic Branch
Exchange (PABX).
Prints any excess at the bottom of a fax page without discarding it.
Discards any excess at the bottom of a fax page.
Automatically reduces a fax page to fit it onto the output paper.
Enables the ECM. To use the ECM, the remote machines must also support the
ECM.
Disables the ECM.
Specifies the fax modem speed when a fax transmission or reception error occurs.
Automatically prints a fax activity report after every 50 incoming and outgoing fax
communications.
Does not automatically print a fax activity report.
Does not print a transmission report after a fax transmission.
Prints a transmission report only when an error occurs.
Prints a transmission report after every fax transmission.