Margin Middle - Dell C1765nf Color Laser User Manual

2 Press the (Copy) button.
3 Press the button until Margin Left/Right is highlighted, and then press the
4 Press the or button or enter the desired value using the numeric keypad, and then press the
button.
NOTE:
Values marked by an asterisk (
4 mm*/0.2 inch*
Available Range:
0-50 mm/0.0-2.0 inch
5 Press the
(Start) button to begin copying.

Margin Middle

To specify the middle margin of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the (Copy) button.
3 Press the button until Margin Middle is highlighted, and then press the
4 Press the or button or enter the desired value using the numeric keypad, and then press the
button.
NOTE:
Values marked by an asterisk (
0 mm*/0.0 inch*
Available Range:
0-50 mm/0.0-2.0 inch
5 Press the (Start) button to begin copying.
242
Copying
*
) are the factory default menu settings.
Specify the value in increments of 1 mm/0.1 inch.
*
) are the factory default menu settings.
Specify the value in increments of 1 mm/0.1 inch.
(Set) button.
(Set)
(Set) button.
(Set)