Auto Reset
Purpose:
To automatically reset the settings for COPY, SCAN, or FAX to the defaults and return to the standby mode after you
do not specify any settings for the specified time.
Values:
45sec*
1min
2min
3min
4min
Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The print job is cancelled if it
times out.
Values:
Off
On*
60sec*
Available Range:
3–300sec
Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is cancelled
if it times out.
Values:
Off
On*
30sec*
Available Range:
5–300sec
Disables the fault time-out.
Specifies the time taken by the printer before it cancels for jobs that stop abnormally.
Disables the job time-out.
Specifies the amount of time that the printer waits for data to arrive from the computer.
Understanding the Printer Menus
189