How To Save Or Change The Configuration Settings - Cisco SFE2000P Installation And Configuration Manual

Chapter 7 Basic SCE 2000 Platform Operations
After configuring the SCE platform, you may query for the running configuration using the command
show running-config. This command displays the non-default running configuration. To view all SCE
platform running configuration, whether it is the default or not, you may use the option all-datain the
show running-configcommand.
SUMMARY STEPS
1.
DETAILED STEPS
At the SCE 2000# prompt, type show running-config.
Step 1
The system shows the running configuration.
SCE 2000#show running-config#This is a general configuration file (running-config).
#Created on 15:50:56 CET MON December 11 2005
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community "public" ro
snmp-server host 10.1.1.253 traps version 1 "public"
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 2000#

How to Save or Change the Configuration Settings

When you make changes to the current running configuration and you want those changes to continue
to be valid when the system restarts, you must save the changes before leaving the management session,
that is, you must save the running configuration to the startup configuration file.
The SCE platform provides multiple interfaces for the purpose of configuration and management. All
interfaces supply an API to the same database of the SCE platform and any configuration made through
one interface is reflected through all interfaces. Furthermore, when saving the running configuration to
the startup configuration from any management interface, all configuration settings are saved regardless
of the management interface used to set the configuration.
For backup purposes, the old startup-config file is saved under the directory:
Refer to
configuration.
To remove a configuration command from the running-config, use the no form of the command.
OL-7824-06
At the SCE 2000# prompt, type show running-config.
How to Recover a Previous Configuration for an explanation on how to recover a previous
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Managing SCE 2000 Configurations
tffs0:system/prevconf
7-5
.