Final Tests; How To Verify Operational Status; How To View The User Log Counters - Cisco SFE2000P Installation And Configuration Manual

Chapter 7 Basic SCE 2000 Platform Operations
It takes a several minutes for the SCE 2000 to boot and for the status LED to change from orange to
Note
flashing orange or flashing green.
Observe the initialization process. When the system boot is complete, the console screen displays a
Step 5
script and system banner similar to the following:
Cisco Internetwork Operating System Software
IOS (tm) 7300 Software (C7300-JS-M), Version 12.1(9), CISCO RELEASED VERSION
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 17-MAY-06 01:51 by biff
Image text-base:0x40008970, data-base:0x40BF8000
Step 6 When you start up the SCE 2000 platform for the first time, the system automatically enters the setup
wizard, which prompts you for configuration information for initial system configuration. On the
console terminal, after the system displays the system banner and hardware configuration, you will see
the System Configuration Dialog prompt. (Refer to
Performing Initial System Configuration
You have the option of proceeding with the setup wizard to configure the system, or exiting from setup
and using configuration commands to configure global (system-wide) and interface-specific parameters.
You do not have to configure the interfaces immediately.

Final Tests

The procedures for performing the final tests to verify that the SCE 2000 is functioning properly are
explained in the following sections:
•
•

How to Verify Operational Status

After all the ports are connected, verify that the SCE 2000 is not in a Warning state.
•
SUMMARY STEPS
1.
2.
DETAILED STEPS
On the SCE 2000 Front panel, examine that the Status LED is flashing green.
Step 1
Step 2 To display the operation status of the system, at the SCE 2000# prompt, type show system
operation-statusand press Enter.
A message displaying the operation status of the system appears. If the system is operating in order, the
following message appears:
OL-7824-06
How to Verify Operational Status

How to View the User Log Counters

Examples for Verifying Operational Status
On the SCE 2000 Front panel, examine that the Status LED is flashing green.
To display the operation status of the system, at the SCE 2000# prompt, type show system
operation-statusand press Enter.
Connecting the Management Interfaces and
for a complete description of the setup wizard.)
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Starting the SCE 2000 Platform
7-3