Single Link: Receive-Only Topology - Cisco SFE2000P Installation And Configuration Manual

Information About Topology Considerations
Figure 3-2
Subscriber
PWR A PWR B
Subscriber
This topology supports both monitoring and control functionality, and is referred to as "inline"
connection mode.

Single Link: Receive-only Topology

In this topology, an optical splitter resides physically on the GBE link between the subscribers and the
network. The traffic passes through the optical splitter, which splits traffic to the SCE 2000 . The SCE
2000, therefore, only receives traffic and does not transmit.
Cisco SCE 2000 4xGBE Installation and Configuration Guide
3-6
Single SCE Platform Dual Link Inline Topology
Router
STATUS BYPASS
LINK RX TX
RX MM TX
GBE-1
SUB LINE
Router
Router
Link 1
Cisco SCE 2000
LINK RX TX LINK RX TX
RX MM TX RX MM TX
GBE-2
NET SUB LINE/CASCADE NET
Link 2
Router
Chapter 3 Information About Topology
Network
Series
4xGBE
LINK RX TX
RX MM TX
Network
OL-7824-06