How To Display The Sce Platform Inventory; Example For Displaying The Sce Platform Inventory; How To Display The System Uptime; Examples For Displaying The System Uptime - Cisco SFE2000P Installation And Configuration Manual

Chapter 7 Basic SCE 2000 Platform Operations

How to Display the SCE Platform Inventory

Unique Device Identification (UDI) is a Cisco baseline feature that is supported by all Cisco platforms.
This feature allows network administrators to remotely manage the assets in their network by tracing
specific devices through either CLI or SNMP. The user can display inventory information for a remote
device via either:
•
•
The show inventoryCLI command displays the following information:
•
•
•
•
•
From the SCE 2000>prompt, type show inventoryand press Enter.
Step 1

Example for Displaying the SCE Platform Inventory

The following example shows how to display the inventory (UDI) of the SCE platform.
SCE 2000>show inventoryNAME: "Chassis",
DESCR: "Cisco SCE 2020 Service Control Engine, Multi Mode, 4-port GE"
PID: SCE2020-4XGBE-MM , VID: V01, SN: CAT093604K3
SCE 2000>

How to Display the System Uptime

Use this command to see how long the system has been running since the last reboot.
At the SCE 2000# prompt, type show system-uptimeand press Enter.
Step 1

Examples for Displaying the System Uptime

The following example shows how to display the system uptime of the SCE platform.
SCE 2000#show system-uptimeSCE 2000 uptime is 21 minutes, 37 seconds
SCE 2000#
OL-7824-06
Entity MIB (see Final Tests
Guide )
CLI show inventorycommand
Device name
Description
Product identifier
Version identifier
Serial number
in the Cisco Service Control Engine (SCE) Software Configuration
Cisco SCE 2000 4xGBE Installation and Configuration Guide
How to Display the SCE Platform Inventory
7-9