Chapter 7 Basic Sce 2000 Platform Operations; Starting The Sce 2000 Platform; Checking Conditions Prior To System Startup - Cisco SFE2000P Installation And Configuration Manual

Basic SCE 2000 Platform Operations
This chapter describes how to start up the SCE 2000 platform, reboot, and shutdown. It also describes
how to manage configurations.
•
•
•
•
•
•

Starting the SCE 2000 Platform

The procedures for starting the SCE 2000 platform are explained in the following sections:
•
•
•
•

Checking Conditions Prior to System Startup

Check the following conditions before you start your SCE 2000 platform:
•
•
•
OL-7824-06
Starting the SCE 2000 Platform
Managing SCE 2000 Configurations
How to Display the SCE Platform Version Information
How to Display the SCE Platform Inventory
How to Display the System Uptime
Rebooting and Shutting Down the SCE Platform
Checking Conditions Prior to System Startup
Performing Complex Configurations
Starting the System and Observing Initial Conditions
Final Tests
Both power supply units are installed and connected
First-time startup at installation:
SCE 2000 platform connected to local console (CON port)
–
The console terminal is turned on and properly configured
–
Subsequent startups
Line and Cascade interfaces are properly cabled (optional)
–
– SCE 2000 platform is connected to at least one of the following types of management stations:
– Direct connection to local console (CON port)
C H A P T E R
Cisco SCE 2000 4xGBE Installation and Configuration Guide
7
7-1