Show Islb Initiator - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show islb initiator

To display iSCSI server load balancing (iSLB) Cisco Fabric Services information, use the show islb
initiator command.
Syntax Description name node-name
detail
fcp-session
iscsi-session
configured
name initiator-name
summary
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines
None.
Examples The following example shows iSLB initiator configuration information.
switch# show islb initiator configured
iSCSI Node name is 1.1.1.1
iSCSI Node name is 2.2.2.2
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show islb initiator [name node-name [detail | fcp-session [detail] | iscsi-session [detail]] |
configured [name initiator-name] | detail | fcp-session [detail] | iscsi-session [detail] |
summary [name]]
Displays the initiator node name. The maximum size is 80.
Displays more detailed information.
Displays Fbire Channel session details.
Displays iSLB session details.
Displays iSLB initiator configured information.
Displays the configured initiator name. The maximum size is 223.
Displays iSLB initiator summary information.
Modification
This command was introduced.
No. of PWWN: 2
Port WWN is 23:01:00:0c:85:90:3e:82
Port WWN is 23:02:00:0c:85:90:3e:82
Load Balance Metric: 1000
Number of Initiator Targets: 0
Load Balance Metric: 1000
Number of Initiator Targets: 0
Cisco MDS 9000 Family Command Reference
show islb initiator
22-195