Islb Commit - Cisco MDS 9124 - Fabric Switch Reference

islb commit

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
islb commit
To commit a pending iSCSI server load balancing (iSLB) configuration, use the islb commit command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History Release
3.0(1)
Usage Guidelines
You can use the islb commit command to commit the pending changes to the iSLB configuration and
release the fabric lock. This action changes the active configuration on all Cisco MDS switches in the
fabric.
The islb commit command can be issued only by the user who started the Cisco Fabric Services (CFS)
session and only on the switch that started the CFS session.
Examples The following example commits the pending iSLB configuration distribution.
switch# config t
switch(config)# islb commit
Related Commands Command
islb abort
islb distribute
clear islb session
show islb cfs-session status Displays iSLB information.
show islb pending
show islb pending-diff
Cisco MDS 9000 Family Command Reference
11-102
islb commit
Modification
This command was introduced.
Description
Discards the pending iSLB configuration distribution and releases the
fabric lock.
Enables iSLB configuration distribution.
Clears a pending iSLB configuration. This command can be issued on any
switch by a user with admin privileges.
Displays the pending configuration changes.
Displays the differences between the pending configuration and the
current configuration.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands