Cisco MDS 9124 - Fabric Switch Reference page 967

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example shows how to configure the SPAN source interface as iSCSI interface 4/1.
switch(config-span)# source interface iscsi 4/1
The following example shows how to disable configure the SPAN source interface as FC 9/1 with an
egress filter for VSAN 1.
switch(config-span)# no source interface fc9/1 tx filter vsan 1
Related Commands Command
switchport
span session
destination interface
suspend
show span session
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Description
Configures the switch port mode on the Fibre Channel interface.
Selects or configures the SPAN session and changes to SPAN
configuration submode.
Configures a SPAN destination interface.
Suspends a SPAN session.
Displays specific information about a SPAN session
Cisco MDS 9000 Family Command Reference
source
21-49