Show Npv Internal Info - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show npv internal info

To display internal N Port Virtualization (NPV) information, use the show npv internal info command.
Syntax Description
This command has no other arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
3.2(1)
Usage Guidelines None.
Examples The following example displays the NPV internal information.
switch# show npv internal info
NPV Globals:
============
NPV mode: ENABLED
Switch-Name: 172.20.150.98
Switch Mgmt IP Address: 172.20.150.98
proxy logo Retries: 1
Internal FLOGI max timeout Retries: -1
NS Registration max timeout Retries: 5
timer group handle: 0x30038fe0
Number of Active External Interfaces: 0
External Interface Info:
========================
Interface Information:
ifindex: fc1/1, VSAN: 1, internal FLOGI fcid: 0x1e0000
FSM current state: NPIVP_EXT_IF_ST_FLOGI_FAILED
Internal FLOGI Fail Reason: Mismatch in VSAN for this upstream port
fabric pwwn: 20:05:00:05:30:00:ca:16, fabric nwwn: 20:0a:00:05:30:00:ca:17
my pwwn: 20:01:00:05:30:01:71:b8, my nwwn: 20:01:00:05:30:01:71:b9
Port Parameters:
Rx B2B Credits: 16, Multiplier: 0, Buff Size: 2112
Tx B2B Credits: 16, Multiplier: 0, Buff Size: 2112, bbscn: 0
bbscn_capable: TRUE bbscn_max: 14, port_bbscn: 0
Timer & Retry Information:
Busy Timer
Fail Retry Timer
FDISC Response Timer
Error Clear Timer
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show npv internal info
Modification
This command was introduced.
(1), id: 21045, active: FALSE time remaining: 0
(7), id: 4209, active: TRUE time remaining: 1
(2), id: 00, active: FALSE time remaining: 0
(6), id: 71, active: TRUE time remaining: 433
Cisco MDS 9000 Family Command Reference
show npv internal info
22-267