Show Isapi Dpp - Cisco MDS 9124 - Fabric Switch Reference

show isapi dpp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show isapi dpp
To obtain a list of ITLs for a specific Data Path Processor (DPP), use the show isapi dpp command.
Syntax Description
dpp-number
Defaults None.
Command Modes EXEC mode.
Command History Release
3.2(1)
Usage Guidelines None.
Examples The following example displays the isapi infomation for DPP number 7.
module-3# show isapi dpp 7 queue
I_T 0x837c9140 [vsan 42 host 0x8d0005 vt 8d0014/92:81:00:00:08:50:ca:d4]: 0 tasks, mtu
2048, seqid 99, abts 0 BSY
Q 837cc380: LUN 3, status 0x22, R/W access 0x0/0x0, 0 tasks, 0 busy/TSF, 0 ho
Tasks:
Q 837cbd80: LUN 2, status 0x22, R/W access 0x0/0x0, 0 tasks, 0 busy/TSF, 0 ho
Tasks:
Q 837cb100: LUN 1, status 0x22, R/W access 0x0/0x0, 0 tasks, 0 busy/TSF, 0 ho
Tasks:
Q 837cb080: LUN 0, status 0x22, R/W access 0x0/0x0, 0 tasks, 0 busy/TSF, 0 ho
Tasks:
Related Commandss Command
show isapi dpp all
queue
Cisco MDS 9000 Family Command Reference
22-182
show isapi dpp dpp-number
Specifies the slot along with the DPP number.
Modification
This command was introduced.
Description
Displays ITLs for all DPPs on the SSM.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x