Show Fspf - Cisco MDS 9124 - Fabric Switch Reference

show fspf

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fspf
To display global FSPF information, use the show fspf command.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description database
vsan vsan-id
detail
domain domain-id
interface
fc slot/port
bay port | ext port
port-channel port-channel Specifies the port channel interface. The range is 1 to 256.
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines If no other parameters are given, all the LSRs in the database are displayed. If more specific information
is required, then the domain number of the owner of the LSR may be given. Detail gives more detailed
information on each LSR.
Examples The following example displays FSPF interface information.
switch# show fspf interface vsan 1 fc1/1
FSPF interface fc1/1 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Cisco MDS 9000 Family Command Reference
22-126
show fspf [database vsan vsan-id [detail | domain domain-id detail] | interface | vsan vsan-id
interface [fc slot/port | port-channel port-channel]]
Displays the FSPF link state database.
Specifies the VSAN ID. The range is 1 to 4093.
Displays detailed FSPF information.
Specifies the domain of the database. The range is 0 to 255.
Specifies the FSPF interface.
(Optional) Specifies the Fibre Channel interface to configure by slot and
port number on an MDS 9000 Family switch.
(Optional) Specifies the Fibre Channel interface by bay or by external port
on a Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric
Switch for IBM BladeCenter. The range is 0 to 48.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x