Show Interface Sme - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show interface sme

To display the information about Cisco SME interface, use the show interface sme command.
command.
Syntax Description
slot
port
brief
counters
description
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.2(2)
Usage Guidelines
None.
Examples
The following example displays the brief description of the Cisco SME interface:
switch# show interface sme 3/1 brief
------------------------------------------------------------------------------
Interface
------------------------------------------------------------------------------
sme3/1
The following example displays the counters of the interface:
switch# show interface sme 3/1 description
sme3/1
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show interface sme slot/port {brief | counters | description}
Identifies the number of the MPS-18/4 module slot.
Identifies the number of the Cisco SME port.
Displays the brief information about Cisco SME interface.
Displays the interface counters.
Displays the description of the interface.
Modification
This command was introduced.
Status
up
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec
SME statistics
input 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec
clear 0 bytes, encrypt 0 bytes, decrypt 0
compress 0 bytes, decompress 0 bytes
output 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec
clear 0 bytes, encrypt 0 bytes, decrypt 0
compress 0 bytes, decompress 0 bytes
compression ratio 0:0
flows 0 encrypt, 0 clear
Cluster
c2
Cisco MDS 9000 Family Command Reference
show interface sme
22-149