Ip Routing - Cisco MDS 9124 - Fabric Switch Reference

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip routing

To enable the IP forwarding feature, use the ip routing command in configuration mode. To disable this
feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example enables the IP forwarding feature.
switch# config terminal
switch(config)# ip routing
Related Commands Command
show ip routing
OL-16217-01, Cisco MDS SAN-OS Release 3.x
ip routing
no ip routing
Modification
This command was introduced.
Description
Displays the IP routing state.
Cisco MDS 9000 Family Command Reference
ip routing
11-57