Cisco MDS 9124 - Fabric Switch Reference page 733

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Examples The following command enters configuration mode, enables the IVR feature, enters the VSAN topology
database, and configures the pWWN-VSAN association for VSANs 2 and 2000:
switch# config terminal
Enter configuration commands, one per line.
switch(config)# ivr enable
switch(config)# ivr vsan-topology database
switch(config-ivr-topology-db)# autonomous-fabric-id 1 switch 20:00:00:00:30:00:3c:5e
vsan-ranges 2,2000
Related Commands Command
ivr enable
autonomous0fabric-id (IVR topology
database configuration)
show ivr
OL-16217-01, Cisco MDS SAN-OS Release 3.x
End with CNTL/Z.
Description
Enables the Inter-VSAN Routing (IVR) feature.
Configure an autonomous phobic ID into the IVR
topology database
Displays IVR feature information.
Cisco MDS 9000 Family Command Reference
ivr vsan-topology database
11-141