Show Ips Netsim - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ips netsim

To display a summary of the IP Network Simulator interface status currently operating, use the show ips
netsim command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC.
Command History Release
3.1(1)
Usage Guidelines None.
Examples The following example shows the IP Network Simulator interfaces operating in network simulation
mode.
switch# show ips netsim
Following ports operate in network simulator mode
GigabitEthernet2/3 and GigabitEthernet2/4
Related Commands Command
ips netsim enable
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show ips netsim
Modification
This command was introduced.
Description
Enables two Gigabit Ethernet interfaces to operate in network simulation
mode.
Cisco MDS 9000 Family Command Reference
show ips netsim
22-165