Ivr Withdraw Domain - Cisco MDS 9124 - Fabric Switch Reference

ivr withdraw domain

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ivr withdraw domain
To withdraw overlapping virtual domain from a specified VSAN, use the ivr withdraw domain
command in EXEC mode.
Syntax Description domain-id
vsan vsan-id
Defaults
None.
Command Modes
EXEC mode.
Command History Release
1.3(4)
Usage Guidelines When you enable the ivr virtual-fcdomain-add command, links may fail to come up due to overlapping
virtual domain identifiers. If so, temporarily withdraw the overlapping virtual domain from that VSAN
using the ivr withdraw domain command in EXEC mode.
Examples The following command withdraws overlapping domains.
switch# ivr withdraw domain 10 vsan 20
Related Commands Command
show ivr virtual-fcdomain-add-status
Cisco MDS 9000 Family Command Reference
11-142
ivr withdraw domain domain-id vsan vsan-id
Specifies the domain id. The range is 1 to 239.
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays the configured VSAN topology for a fabric.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands