Cisco MDS 9124 - Fabric Switch Reference page 618

interface fc-tunnel
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example enables traffic flow through this interface.
switch(config-if)# no shutdown
The following example references the configured path in the source switch (switch S).
switch# config t
switch(config)# interface fc-tunnel 100
switch(config)# explicit-path Path1
Related Commands Command
show interface fc-tunnel Displays an FC tunnel interface configuration for a specified interface.
fc-tunnel explicit-path
Cisco MDS 9000 Family Command Reference
11-26
Description
Configures a new or existing next-hop path.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands