Toolbar - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Menus and Toolbar
Table 3-11 Menu Bar (continued)
Menu-Bar Options
Help For Active Window
Contents
Legend
About
1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the
page 3-31.
2. Some options from this menu option are not available in read-only mode.
3. Available only from a Device Manager session on a cluster member.
4. Available only from a Device Manager session on a command-capable switch that is not a cluster member.
5. Available only from a cluster management session.

Toolbar

The toolbar buttons display commonly-used switch and cluster configuration options and information
windows such as legends and online help. Hover the cursor over an icon to display the feature.
Table 3-12
Table 3-12 Toolbar Buttons
Toolbar Option
Print
1
Preferences
2
Save Configuration
2
Software Upgrade
1
Port Settings
1
VLAN
Inventory
Refresh
Front Panel
3
Topology
3
Topology Options
2 3
Save Topology Layout
Legend
Help For Active Window
Catalyst 2950 Desktop Switch Software Configuration Guide
3-20
Task
Display the help for the active open window. This is the same as clicking Help from the
active window.
List all of the available online help topics.
Display the legend that describes the icons, labels, and links.
Display the CMS version number.
describes the toolbar options, from left to right on the toolbar.
Keyboard
Shortcut Task
Ctrl-P Print a CMS window or help file.
Ctrl-R Set CMS display properties, such as polling intervals, the views to open at CMS
startup, and the color of administratively shutdown ports.
Ctrl-S Save the configuration for the cluster or switch to Flash memory.
Ctrl-U Upgrade the software for the cluster or a switch.
– Display and configure port parameters on a switch.
– Display VLAN membership, assign ports to VLANs, and configure 802.1Q
trunks.
– Display the device type, the software version, the IP address, and other
information about a switch.
– Update the views with the latest status.
– Display the Front Panel view.
– Display the Topology view.
– Select the information to be displayed in the Topology view.
– Save the presentation of the cluster icons that you arranged in the Topology
view to Flash memory.
– Display the legend that describes the icons, labels, and links.
F1 key Display the help for the active open window. This is the same as clicking Help
from the active window.
Chapter 3 Getting Started with CMS
"Access Modes in CMS" section on
78-14982-01