Cluster Tree - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Front Panel View
Figure 3-5
Left-click the Mode
button to change
the meaning of the

Cluster Tree

The cluster tree (see
left frame of the Front Panel view and shows the name of the cluster and a list of its members. The
sequence of the cluster-tree icons (see
can change the sequence by selecting View > Arrange Front Panel. The colors of the devices in the
cluster tree show the status of the devices (see
If you want to configure switch or cluster settings on one or more switches, select the appropriate
Front-Panel image.
•
•
If the cluster has many switches, you might need to scroll down the window to display the rest of the
front-panel images. Instead of scrolling, you can click an icon in the cluster tree, and CMS then scrolls
and displays the corresponding front-panel image.
Figure 3-6
Table 3-1
Color
Green
Yellow
Red
Catalyst 2950 Desktop Switch Software Configuration Guide
3-6
Front Panel View from a 2950 non-LRE Standalone Switch
2950-24
2950-24
LEDs display the
current port mode
and the status of the
port LEDs. switch and
connected RPS.
Figure 3-2
To select a front-panel image, click either the cluster-tree icon or the corresponding front-panel
image. The front-panel image is then highlighted with a yellow outline.
To select multiple front-panel images, press the Ctrl key, and left-click the cluster-tree icons or the
front-panel images. To deselect an icon or image, press the Ctrl key, and left-click the icon or image.
Cluster-Tree Icons
Cluster Tree Icon Colors
Device Status
Switch is operating normally.
The internal fan of the switch is not operating, or the switch is receiving power from an RPS.
Switch is not powered up, has lost power, or the command switch is unable to communicate
with the member switch.
Right-click a port to
display the port pop-up
menu, and select an
option to view or change
port-related settings.
for LRE switches and Figure 3-3
Figure 3-6) mirror the sequence of the Front-Panel images. You
Table 3-1).
Chapter 3 Getting Started with CMS
Press Ctrl, and then
left-click ports to select
multiple ports. The color
of the port LED reflects
port or link status.
for non-LRE switches) appears in the
78-14982-01