Vmps Configuration Example - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Configuring VMPS

VMPS Configuration Example

Figure 14-5
In this example, these assumptions apply:
•
•
•
•
•
Figure 14-5 Dynamic Port VLAN Membership Configuration
station 1
station 2
Catalyst 2950 Desktop Switch Software Configuration Guide
14-32
shows a network with a VMPS server switch and VMPS client switches with dynamic ports.
The VMPS server and the VMPS client are separate switches.
The Catalyst 5000 series Switch 1 is the primary VMPS server.
The Catalyst 5000 series Switch 3 and Switch 10 are secondary VMPS servers.
The end stations are connected to these clients:
– Catalyst 2950 Switch 2
Catalyst 3500 XL Switch 9
–
The database configuration file is stored on the TFTP server with the IP address 172.20.22.7.
Primary VMPS
Server 1
Dynamic-access port
End
Secondary VMPS
Server 2
Dynamic-access port
End
Secondary VMPS
Server 3
Catalyst 5000 series
172.20.26.150
Switch 1
Client
172.20.26.151
Switch 2
Trunk port
172.20.26.152
Switch 3
172.20.26.153
Switch 4
172.20.26.154
Switch 5
172.20.26.155
Switch 6
172.20.26.156
Switch 7
172.20.26.157
Switch 8
Client
172.20.26.158
Switch 9
Trunk port
172.20.26.159
Switch 10
Chapter 14 Configuring VLANs
TFTP server
Router
172.20.22.7
78-14982-01