Cisco 2950G 24 - Catalyst Switch Software Configuration Manual page 71

Chapter 3 Getting Started with CMS
Figure 3-3
cluster1
Cluster tree.
When CMS is launched from a standalone or noncommand member switch, the Front Panel view
displays only the front panel of the specific switch (see
a 2950 LRE switch).
Figure 3-4
2950-24
Left-click the Mode
button to change
the meaning of the
port LEDs.
78-14982-01
Front Panel View from a 2950 Command Switch
Front Panel View from a Standalone 2950 LRE Switch
2950-24
LEDs display the
current port mode
and the status of the
switch and
connected RPS.
10.1.1.2
Right-click a member
switch image to display
the device pop-up
menu, and select an
option to view or change
system-related settings.
Figure 3-5 for a 2950 switch and
Right-click a port to
display the port pop-up
menu, and select an
option to view or change
port-related settings.
Catalyst 2950 Desktop Switch Software Configuration Guide
Front Panel View
Right-click the
command switch
image to display the
cluster pop-up menu,
and select a cluster-
related option.
Figure 3-4 for
Press Ctrl, and then
left-click ports to select
multiple ports. The color
of the port LED reflects
port or link status.
3-5