Displaying Mvr Information - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Chapter 17 Configuring IGMP Snooping and MVR
This is an example of output from the show mvr interface privileged EXEC command when the
member keyword is included:
Switch# show mvr interface fastethernet0/2 members
224.0.1.1

Displaying MVR Information

You can display MVR information for the switch or for a specified interface.
Beginning in privileged EXEC mode, use the commands in
Table 17-6 Commands for Displaying MVR Information
show mvr
show mvr interface [interface-id]
[members [vlan vlan-id]]
show mvr members [ip-address] Displays all receiver ports that are members of any IP multicast group or the specified IP
This is an example of output from the show mvr privileged EXEC command:
Switch# show mvr
MVR Running: TRUE
MVR multicast vlan: 1
MVR Max Multicast Groups: 256
MVR Current multicast groups: 256
MVR Global query response time: 5 (tenths of sec)
MVR Mode: compatible
This is an example of output from the show mvr interface privileged EXEC command:
Switch# show mvr interface
Port
----
Fa0/1
Fa0/2
Fa0/3
Fa0/5
78-14982-01
DYNAMIC ACTIVE
Displays MVR status and values for the switch—whether MVR is enabled or disabled,
the multicast VLAN, the maximum (256) and current (0 through 256) number of
multicast groups, the query response time, and the MVR mode.
Displays all MVR interfaces and their MVR configurations.
When a specific interface is entered, displays this information:
Type—Receiver or Source
•
Status—One of these:
•
– Active means the port is part of a VLAN.
– Up/Down means that the port is forwarding or nonforwarding.
– Inactive means that the port is not part of any VLAN.
Immediate Leave—Enabled or Disabled
•
If the members keyword is entered, displays all multicast group members on this port or,
if a VLAN identification is entered, all multicast group members on the VLAN. The
VLAN ID range is 1 to 1005 when the SI is installed and 1 to 4094 when the EI is
installed; do not enter leading zeros.
multicast group IP address.
Type Status
---- ------- ---------------
SOURCE ACTIVE/UP
SOURCE ACTIVE/UP
SOURCE ACTIVE/DOWN
SOURCE ACTIVE/DOWN
Table 17-6
Immediate Leave
DISABLED
DISABLED
DISABLED
DISABLED
Catalyst 2950 Desktop Switch Software Configuration Guide
Displaying MVR Information
to display MVR configuration:
17-19