Cisco WS-C2950-24 Datasheet

DATA SHEET
Cisco Catalyst 2950 Series Switches
WITH ENHANCED IMAGE SOFTWARE

PRODUCT OVERVIEW

® ®
Cisco Catalyst 2950 Series switches are fixed-configuration models that provide wire-speed Fast Ethernet and Gigabit Ethernet connectivity for
small and medium-sized networks. The Cisco Catalyst 2950 Series is an affordable product line that brings intelligent services, such as enhanced
security, high availability, and advanced quality of service (QoS), to the network edge—while maintaining the simplicity of traditional LAN
switching.
Embedded in all Cisco Catalyst 2950 Series switches is the Cisco Device Manager software, which allows users to easily configure and monitor the
switch using a standard Web browser, eliminating the need for more complex terminal emulation programs and knowledge of the command-line
interface (CLI). Customers can easily initialize the switch with web-based Cisco Express Setup, without using the CLI. In addition, with Cisco
Network Assistant, a standalone network management software, customers can simultaneously configure and troubleshoot multiple Cisco Catalyst
desktop switches. Cisco Device Manager, Cisco Express Setup, and Cisco Network Assistant reduce the cost of deployment by enabling less-skilled
personnel to set up switches quickly. Furthermore, Cisco Catalyst 2950 Series switches provide extensive management tools using Simple Network
Management Protocol (SNMP) network management platforms such as CiscoWorks.
This product line offers two distinct sets of software features and several configurations to allow small, medium-sized, and enterprise branch offices
to select the right combination for the network edge. Cisco Standard Image software offers Cisco IOS
and video services. For networks that require additional security, advanced QoS, and high availability, Cisco Enhanced Image software delivers
intelligent services such as rate limiting, QoS reclassifying, and security filtering for deployment at the network edge.
Cisco Catalyst 2950 Series switches consist of the following devices, which are only available with Enhanced Image software for the Cisco
Catalyst 2950 Series.
Cisco Catalyst 2950G 48—48 10/100 ports and 2 Gigabit Interface Converter (GBIC)-based Gigabit Ethernet ports
Cisco Catalyst 2950G 24—24 10/100 ports and 2 GBIC ports
Cisco Catalyst 2950G 24-DC—24 10/100 ports, 2 GBIC ports, DC power
Cisco Catalyst 2950G 12—12 10/100 ports and 2 GBIC ports
Cisco Catalyst 2950T 24—24 10/100 ports and 2 fixed 10/100/1000BASE-T uplink ports
Cisco Catalyst 2950C 24—24 10/100 ports and 2 fixed 100BASE-FX uplink ports
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 2
®
Software capabilities for basic data, voice,