Topology View - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Topology View

Table 3-6
Mode
Static access
Dynamic access
802.1Q trunk
Negotiate trunk

Topology View

The Topology view displays how the devices within a switch cluster are connected and how the switch
cluster is connected to other clusters and devices. From this view, you can add and remove cluster
members. This view provides two levels of detail of the network topology:
•
•
The Topology view displays only the switch cluster and network neighborhood of the specific command
Note
or member switch that you access. To display a different switch cluster, you need to access the command
switch or member switch of that cluster.
You can arrange the device icons in this view. To move a device icon, click and drag the icon. To select
multiple device icons, you can either:
•
•
After selecting the icons, drag the icons to any area in the view.
Catalyst 2950 Desktop Switch Software Configuration Guide
3-10
VLAN Membership Modes
Color
Light green
Pink
Peach
White
When you right-click a cluster icon and select Expand Cluster, the Topology view displays the
switch cluster in detail. This view shows the command switch and member switches in a cluster. It
also shows candidate switches that can join the cluster. This view does not display the details of any
neighboring switch clusters. (See
When you right-click a command-switch icon and select Collapse Cluster, the cluster is collapsed
and represented by a single icon. The view shows how the cluster is connected to other clusters,
candidate switches, and devices that are not eligible to join the cluster (such as routers, access
points, IP phones, and so on). (See
Press the left mouse button, drag the pointer over the group of device icons that you want to select,
and then release the mouse button.
Press the Ctrl key, and click the device icons that you want to select.
Figure 3-8).
Figure 3-9).
Chapter 3 Getting Started with CMS
78-14982-01