C H A P T E R 8 Configuring 802.1X Port-Based Authentication; Device Roles - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Understanding 802.1X Port-Based Authentication

Device Roles

With 802.1X port-based authentication, the devices in the network have specific roles as shown in
Figure
Figure 8-1
Workstations
(clients)
•
•
•
Catalyst 2950 Desktop Switch Software Configuration Guide
8-2
8-1.
802.1X Device Roles
Catalyst 2950
or 3550
(switch)
Client—the device (workstation) that requests access to the LAN and switch services and responds
to requests from the switch.The workstation must be running 802.1X-compliant client software such
as that offered in the Microsoft Windows XP operating system. (The client is the supplicant in the
IEEE 802.1X specification.)
To resolve Windows XP network connectivity and 802.1X authentication issues, read the
Note
Microsoft Knowledge Base article at this URL:
http://support.microsoft.com/support/kb/articles/Q303/5/97.ASP
Authentication server—performs the actual authentication of the client. The authentication server
validates the identity of the client and notifies the switch whether or not the client is authorized to
access the LAN and switch services. Because the switch acts as the proxy, the authentication service
is transparent to the client. In this release, the Remote Authentication Dial-In User Service
(RADIUS) security system with Extensible Authentication Protocol (EAP) extensions is the only
supported authentication server; it is available in Cisco Secure Access Control Server version 3.0.
RADIUS operates in a client/server model in which secure authentication information is exchanged
between the RADIUS server and one or more RADIUS clients.
Switch (edge switch or wireless access point)—controls the physical access to the network based on
the authentication status of the client. The switch acts as an intermediary (proxy) between the client
and the authentication server, requesting identity information from the client, verifying that
information with the authentication server, and relaying a response to the client. The switch includes
the RADIUS client, which is responsible for encapsulating and decapsulating the Extensible
Authentication Protocol (EAP) frames and interacting with the authentication server.
When the switch receives EAPOL frames and relays them to the authentication server, the Ethernet
header is stripped and the remaining EAP frame is re-encapsulated in the RADIUS format. The EAP
frames are not modified or examined during encapsulation, and the authentication server must
support EAP within the native frame format. When the switch receives frames from the
authentication server, the server's frame header is removed, leaving the EAP frame, which is then
encapsulated for Ethernet and sent to the client.
The devices that can act as intermediaries include the Catalyst 3550 multilayer switch, the Catalyst
2950 switch, or a wireless access point. These devices must be running software that supports the
RADIUS client and 802.1X.
Chapter 8 Configuring 802.1X Port-Based Authentication
Authentication
server
(RADIUS)
78-14982-01