Uninstalling The Client Utilities And The Aironet Client Utility Setup Program - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 4 Troubleshooting and Routine Procedures
Uninstalling the Client Utilities and the Aironet
Client Utility Setup Program
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
OL-0795-01

Uninstalling the Client Utilities and the Aironet Client Utility Setup Program

Follow the instructions below if you need to uninstall the client utilities and the
Aironet Client Utility setup program on computers running Windows 95, 98, NT,
2000, or Me.
Close any Windows programs that are running.
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive.
Select Start > Run and enter the following path (where D is the letter of your
CD-ROM drive): D:\Utilities\ACU\setup.exe.
When the Welcome screen appears, select Remove and click Next.
When asked if you want to completely remove the selected application, click Yes.
If you receive a message indicating that a file was detected that may no longer be
needed by any application but deleting the file may prevent other applications
from running, click Yes.
If you receive a message indicating that locked files were detected, click Reboot.
In the Maintenance Complete screen, click Finish.
If you are prompted to restart your computer, remove the CD from the computer's
CD-ROM drive and click Yes.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
4-25