Cisco AIR-PCM342 Hardware Installation Manual page 66

Installing the Correct Driver
Click the Install button in the bottom right corner of the window.
Step 6
When a window appears informing you that the installation requires a restart of
Step 7
your computer, click the Continue button.
After the files are copied to the designated folder in Macintosh HD, a window
Step 8
appears indicating that the installation was successful. Click the Restart button.
After your computer reboots, follow the instructions in the "Inserting the Client
Step 9
Adapter into a Computing Device" section on page 3-2 to insert the client adapter
into your PowerBook's PC card slot. The Cisco Wireless LAN Adapter icon
appears on the desktop.
Click the apple-shaped icon in the top left corner of the desktop.
Step 10
Step 11 Select Control Panels > AppleTalk. The AppleTalk window appears.
Make sure the name of the correct wireless LAN adapter appears in the Connect
Step 12
via dialog box. If it does not, click the up or down arrow on the right side of the
Connect via dialog box and select the correct adapter.
Step 13 Close the AppleTalk window.
Step 14 Click the apple-shaped icon in the top left corner of the desktop.
Select Control Panels > TCP/IP. The TCP/IP window appears.
Step 15
Step 16 Select Cisco Wireless LAN Adapter in the Connect via drop-down box.
Perform one of the following:
Step 17
•
•
Close the TCP/IP window.
Step 18
Step 19 When a window appears asking if you want to save changes to the current
configuration, click the Save button.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-28
If you are connected to a DHCP server, select Using DHCP Server in the
Configure drop-down box and type your computer's unique client name in the
DHCP Client ID field.
If you are not connected to a DHCP server, select Manually in the Configure
drop-down box and enter the IP address, subnet mask, router address, name
server address, and search domains of your computer (which can be obtained
from your system administrator). Only the IP address and subnet mask are
required.
Chapter 3 Installing the Client Adapter
OL-0795-01