Safety information
Safety information
FCC Safety Compliance Statement
Safety Guidelines
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
2-2
Follow the guidelines in this section to ensure proper operation and safe use of the
client adapter.
The FCC, with its action in ET Docket 96-8, has adopted a safety standard for
human exposure to RF electromagnetic energy emitted by FCC-certified
equipment. Cisco Aironet products meet the uncontrolled environmental limits
found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device
according to the instructions in this publication will result in user exposure
substantially below the FCC recommended limits.
•
Do not touch or move the antenna while the unit is transmitting or receiving.
Do not hold any component containing a radio such that the antenna is very
•
close to or touching any exposed parts of the body, especially the face or eyes,
while transmitting.
•
Do not operate the radio or attempt to transmit data unless the antenna is
connected; otherwise, the radio may be damaged.
Use in specific environments:
•
–
The use of wireless devices in hazardous locations is limited to the
constraints posed by the safety directors of such environments.
–
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
–
The use of wireless devices in hospitals is restricted to the limits set forth
by each hospital.
Chapter 2
Preparing for Installation
OL-0795-01