Installing The Driver For Macos - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 3 Installing the Client Adapter
Installing the Driver for MacOS 9.x
Note
Step 1
Step 2
Step 3
Step 4
Step 5
OL-0795-01
Linux allows you to install the drivers for more than one
Note
client adapter and to then select between the adapters. (Up
to two PC cards and up to five PCI client adapters can be
supported.) To install the driver for another client adapter,
you can follow the previous instructions; however, the
process will be abbreviated now that some files are already
installed. After the drivers and the client utilities are
installed, you can switch back and forth between the client
adapters using the Select Radio parameter in ACU. See the
Cisco Aironet Wireless LAN Adapters Software
Configuration Guide for information on using this
parameter.
Cisco Aironet PCI client adapters are not supported for use with
Apple computers.
If you are using an Apple PowerBook G3 running MacOS 9.x, follow these steps.
Boot up your PowerBook.
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive. The Cisco pc3x0 icon appears on the desktop.
Double-click the Cisco pc3x0 icon. The Cisco pc3x0 window appears.
Double-click the Installer icon. If a window appears indicating that the
installation cannot occur with other applications running, click the Continue
button.
When the Cisco Wireless LAN Adapter Software screen appears, click Continue.
The Install window appears.
The application and driver for the Power Macintosh is shown in the middle of the
window, and the proposed destination of the files to be copied is shown in the
Destination Folder in the bottom left corner of the window. If you want to specify
a different folder, click the Select Folder button and choose a different location.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-27