Resolving Resource Conflicts In Windows 2000 - Cisco AIR-PCM342 Hardware Installation Manual

Problems after Installing the Driver

Resolving Resource Conflicts in Windows 2000

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
4-6
Double-click My Computer, Control Panel, System, the Hardware tab, Device
Manager, and Network Adapters.
Select the Cisco Systems wireless LAN adapter.
In the General screen, the Device Status field indicates if a resource problem
exists. If a problem is indicated, click the Resources tab.
Deselect the Use automatic settings checkbox.
Under Resource Settings or Resource Type, click Input/Output Range.
Look in the Conflicting Device list at the bottom of the screen. If it indicates that
the range is being used by another device, click the Change Setting button.
Scroll through the ranges in the Value dialog box and select one that does not
conflict with another device. The Conflict Information window at the bottom of
the screen indicates if the range is already being used.
Click OK.
Under Resource Settings or Resource Type, click Interrupt Request.
Look in the Conflicting Device list at the bottom of the screen. If it indicates that
the IRQ is being used by another device, click the Change Setting button.
Scroll through the IRQs in the Value dialog box and select one that does not
conflict with another device. The Conflict Information window at the bottom of
the screen indicates if the IRQ is already being used.
Click OK.
Reboot your computer.
Chapter 4 Troubleshooting and Routine Procedures
OL-0795-01