Setup Command Parameters - Cisco SCE 2000 Installation And Configuration Manual

Initial System Configuration

Setup Command Parameters

Table 5-1
Table 5-1
Parameter
IP address
subnet mask
default gateway
Hostname
admin password
root password
password encryption status
Time Settings
time zone name and offset
local time and date
SNTP Configuration
broadcast client status
unicast query interval
unicast server IP address
DNS Configuration
DNS lookup status
default domain name
IP address
RDR Formatter Destination Configuration
IP address
TCP port number
Access Control Lists
Cisco SCE 2000 4xGBE Installation and Configuration Guide
5-4
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
lists the setup comment parameters.
Setup Command Parameters
Definition
IP address of the SCE 2000.
Subnet mask of the SCE 2000.
Default gateway.
Character string used to identify the SCE 2000. Maximum 20
characters.
Admin level password. Character string from 4-100 characters
beginning with an alpha character.
Root level password. Character string from 4-100 characters
beginning with an alpha character.
Enable or disable password encryption?
Standard time zone abbreviation and minutes offset from UTC.
Current local time and date. Use the format: 00:00:00 1 January
2002
Set the status of the SNTP broadcast client. If enabled, the SCE will
synchronize its local time with updates received from SNTP
broadcast servers.
Interval in seconds between unicast requests for update (64 – 1024)
IP address of the SNTP unicast server.
Enable or disable IP DNS-based hostname translation.
Default domain name to be used for completing unqualified host
names
IP address of domain name server. (maximum of 3 servers)
IP address of the RDR-formatter destination
TCP port number of the RDR-formatter destination
OL-7824-07