Upgrading The Driver For Linux; Upgrading The Driver For Macos 9.X - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 4 Troubleshooting and Routine Procedures

Upgrading the Driver for Linux

Step 1
Step 2
Step 3
Step 4

Upgrading the Driver for MacOS 9.x

Step 1
Step 2
Step 3
Step 4
Step 5
OL-0795-01
Make sure your client adapter is installed in your computer.
Copy the new driver from your hard drive or floppy disk to the pcmcia_cs_3.1.21
directory.
Go to the pcmcia_cs_3.1.21 directory and uncompress the new driver file by
typing tar zxvf filename.tar.gz (for example, tar zxvf airo_cs.tar.gz) and pressing
Enter.
Type make -f filename.mk install (for example, make -f airo_cs.mk install) and
press Enter.
The driver upgrade is complete, and the old driver is overwritten by the new one.
Make sure your client adapter is installed in your computer.
Drag and drop the new driver and enablers into the System folder.
When a dialog box appears indicating that the items need to be put into the
Extensions folder, click Yes.
When a dialog box appears indicating that an older version exists, click Yes to
replace it.
Restart your PowerBook.
The driver upgrade is complete, and the old driver is overwritten by the new one.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Updating the Driver
4-23