Removing A Driver Other Than The 6.10 Driver; Removing The Driver For Windows 95, 98, And Me - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 4 Troubleshooting and Routine Procedures
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
Step 21
Step 22
Step 23

Removing a Driver Other Than the 6.10 Driver

Removing the Driver for Windows 95, 98, and Me

Step 1
Step 2
Step 3
Step 4
Step 5
OL-0795-01
Remove the CD from your computer's CD-ROM drive.
If you are prompted to restart your computer, click Yes.
When the computer restarts, double-click My Computer, Control Panel, and
Add/Remove Hardware.
In the Add/Remove Hardware Wizard window, click Next.
Click Uninstall/Unplug a device. Click Next.
Click Uninstall a device. Click Next.
From the Devices list, select the Cisco Systems wireless LAN adapter. Click
Next.
Click Yes, I want to uninstall this device. Click Next.
Click Finish.
Shut down your computer.
Remove the client adapter.
Go to the "Inserting the Client Adapter into a Computing Device" section on
page 3-2 for instructions on inserting your new client adapter and installing the
latest driver.
To uninstall a driver other than the 6.10 driver, follow the instructions that apply
to your computer's operating system.
Double-click My Computer, Control Panel, and Network.
In the Network window, select the Cisco Systems wireless LAN adapter.
Click Remove and OK.
When prompted to restart your computer, click No.
Open Windows Explorer.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Removing the Driver
4-13