Cisco AIR-PCM342 Hardware Installation Manual page 70

Installing the Client Utilities and Enabling LEAP or EAP
In the Setup Complete screen, perform one of the following:
Step 8
•
•
Refer to the Cisco Aironet Wireless LAN Adapters Software Configuration Guide
Step 9
for instructions on how to use each utility.
Note Icons are automatically added to the desktop when you install the
client utilities. If you wish to remove these icons from your desktop,
right-click the icon, click Delete, and click Yes to confirm your
decision.
To install or use the client utilities on Windows NT or Windows
Note
2000 systems, you must log onto the system as a user with
administrative privileges. The utilities do not install or operate
correctly for users not logged in with administrative rights.
If you ever need to uninstall the client utilities and the Aironet Client
Note
Utility setup program, follow the instructions in the "Uninstalling
the Client Utilities and the Aironet Client Utility Setup Program"
section on page 4-25.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-32
If you selected no server-based authentication in Step 5, select Launch the
Aironet Client Utility and click Finish. ACU opens so you can configure
your client adapter.
If you selected LEAP or EAP server-based authentication in Step 5, select
Yes, I want to restart my computer now, remove the CD from your
computer's CD-ROM drive, and click Finish. When the computer reboots,
enter your username and password at the network logon screen. Following the
sequence of events described in the "EAP and LEAP" section on page 1-6,
the client adapter is authenticated and assigned a session-based WEP key,
provided your client adapter is configured to associate to an EAP-enabled
Access Point.
Chapter 3 Installing the Client Adapter
OL-0795-01