Cisco AIR-PCM342 Hardware Installation Manual page 72

Verifying Installation
If your computer's operating system is Windows CE, Linux, or
Note
MacOS 9.x, LEAP is enabled through the client utilities, not during
the installation of the utilities. For information on enabling LEAP
and verifying authentication for client adapters that are used with
these operating systems, refer to the Cisco Aironet Wireless LAN
Adapters Software Configuration Guide.
If your installation was unsuccessful or you experienced problems
Note
during or after driver installation, refer to Chapter 4 for
troubleshooting tips.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-34
Chapter 3 Installing the Client Adapter
OL-0795-01