Configuration Options; Using The Cisco Configuration Assistant; Device Setup Wizard; Cisco Smart Assist - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Wireless express mobility controller
Hide thumbs Also See for 521G - Unified IP Phone VoIP:
Table of Contents

Advertisement

Configuration Options

Configuration Options
Like many Cisco devices, the WLC526 controller can be configured and operated through more than one
interface. They are:
This section explains use and limitations of each interface.

Using the Cisco Configuration Assistant

The CCA is your primary tool to install, set up, configure, and monitor all the Cisco Smart Business
Communications System devices. Many common tasks are automated, simplified, or guided to help you
to establish and administer a safe, optimized wireless network.
There is no charge to download or use this software. For information about downloading and installing
Note
CCA, refer to
The following sections highlight some of the setup and configuration tools available in CCA.

Device Setup Wizard

The CCA Device Setup Wizard guides you through the steps for making devices ready to use and ready
for CCA to manage. For more information about using the Device Setup Wizard, see
a WLC526 Controller and LAP521 Access Points."
Note
The CCA Device Setup Wizard supports WLC526 controllers running software versions 4.2 and above.
For controllers running earlier versions, see the
section on page

Cisco Smart Assist

CCA includes Cisco Smart Assist features with plug-and-play functionality. Smart Assist features
reduce the time it takes to set up devices and applications and optimize your network settings. Cisco
Smart Assist features include:
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
1-6
Cisco Configuration Assistant (CCA)
Controller web-browser interface (GUI)
Command-line interface (CLI)
Getting Started with Cisco Configuration Assistant
1-8.
Default configurations to allow auto discovery of supported devices
Private branch exchange (PBX) configuration on the Cisco UC500 series appliance
Firewall activation included in the default configuration
Automatic assignment of phone extensions
Password and VLAN synchronization for supported system devices
Predefined configuration templates that automate SSID policy configuration, minimizing the
number of parameters required to complete configuration
1.5.
"Using the Controller Web-Browser Interface (GUI)"
Chapter 1
Overview
Chapter 2, "Adding
OL-15283-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents