Installing The Driver For Windows Nt - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 3 Installing the Client Adapter

Installing the Driver for Windows NT

Note
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
OL-0795-01
This procedure requires that your computer has Windows NT
Service Pack 3 or greater.
If your computer's operating system is Windows NT, follow these steps.
If an error message appears indicating that at least one service or driver failed
during system setup, click OK.
Follow the steps below to obtain an available interrupt request (IRQ):
Select Start > Programs > Administrative Tools > Windows NT
a.
Diagnostics.
Click the Resources tab.
b.
c. The used IRQs are listed in numerical order along the left side of the
Resources window. Write down the number of an IRQ that is not being used.
You will need this IRQ for Step 12.
On your computer desktop, double-click My Computer, Control Panel, and
Devices. Scroll down and select Pcmcia. Click Startup, select Automatic, and
click OK.
For PC cards, also ensure that the Cardbus service is
Note
deselected.
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive.
Double-click My Computer, Control Panel, and Network.
Click the Adapters tab and select Add.
In the Select Network Adapter window, click Have Disk.
In the Insert Disk window, enter the letter of your CD-ROM drive (such as D:\)
and click OK.
In the Select OEM Option box, select the Cisco Systems wireless LAN adapter
and click OK.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-13