Inserting the Client Adapter into a Computing Device
Step 4
Note
Inserting a PCI Client Adapter
Step 1
Step 2
Step 3
Caution
Step 4
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-4
Go to the "Installing the Correct Driver" section on page 3-6 to install the driver
for your computer's operating system.
You can remove and reinsert your PC card when necessary. Refer to
the "Removing a PC Card" section on page 4-24 for instructions.
Turn off the PC and all its components.
Remove the computer cover.
Note
On most Pentium PCs, PCI expansion slots are white. Refer
to your PC documentation for slot identification.
Remove the screw from the top of the CPU back panel above an empty PCI
expansion slot. This screw holds the metal bracket on the back panel.
Static electricity can damage your client adapter. Before removing
the adapter from the anti-static packaging, discharge static by
touching a metal part of a grounded PC.
Examine the client adapter. The antenna connector and the LEDs face out of your
computer and are visible when you put the cover back on. The bottom edge of the
adapter is the connector you will insert into an empty expansion slot in your
computer. See Figure 3-2.
Chapter 3
Installing the Client Adapter
OL-0795-01